Product Description
High Performance Pulley for Belt Conveyors
BRIEF INTRODUCTION
Our company has adopted proprietary technology and equipment imported from German PWH company for the design and manufacturing of various pulleys . As a key component of the conveyor, the pulley should have high reliability. Our company’s R&D center has improved the pulley structure, reduced structural stress, and increased the lifespan and reliability of the pulley group through finite element analysis and optimization calculations. Our company’s pulley is manufactured from specialized high-end manufacturing equipment and has achieved serialized and large-scale production.
We have produced conveyor pulleys for belt width up to 2.4 m, pulley diameter up to 1.8 m, and maximum tension up to 300 tons.
PRODUCT INFORMAITON
| Product Name | Pulley |
| Adhesive Material | smooth, ordinary rubber, wear-resistant rubber, UHMW-PE, rubber ceramic, etc.. |
| Adehensive Treatment | glued or casted |
| Carrying Capacity | light, medium and heavy type |
| Connection Mode | Shafts and wheels of the medium and heavy-duty pulley are connected by expansion sleeves. |
| Pulley Pipe | made of Q235B carbon steel, with high roundness and straightness ensuring rotation balance |
| Shaft | 45 # round steel or according to your requirements; ultrasonic inspection, quenching and tempering treatment, strict control of key fit size tolerances, greatly extending service life. |
| Bearing Brands | Havalo, SKF, FAG, SNK or according to your requirements |
| Bear Seat | Integral bearing seat, partial bearing seat |
| Color | bright red paint or according to your requirements |
VARIOUS TYPES OF PULLEY ADHESIVE SURFACE
BEARING SEAT MODE
TECHNICAL SPECIFICATIONS & PARAMETERS
| Technical Parameters for Belt Conveyor Pulley | ||||||
| Belt Width (mm) | Pulley Standard Diameter without Adhesive Layer(mm) | |||||
| 650 | 200,250,320,400,500,630 | |||||
| 800 | 200,250,320,400,500,630,800,1000,1250 | |||||
| 1000 | 250,320,400,500,630,800,1000,1250,1400,1600 | |||||
| 1200 | 250,320,400,500,630,800,1000,1250,1400,1600 | |||||
| 1400 | 320,400,500,630,800,1000,1250,1400,1600 | |||||
| 1600 | 400,500,630,800,1000,1250,1400,1600 | |||||
| 1800 | 250,400,500,630,800,1000,1250,1400,1600 | |||||
| 2000 | 400,500,630,800,1000,1250,1400,1600 | |||||
| Technical Parameters | ||
| 1 | Outer Circle Diameter D Deviation | 200 ≤ 1.5 400 ≤ 2.0 1000 ≤ 2.5 |
| 2 | Radial Runout of Outer Circle | D ≤ 200 ; without adhesive 0.3 ;with adhesive 0.5 200 < D ≤ 800 ; without adhesive 0.6; with adhesive 1.1 800 < D ≤ 1600 ; without adhesive 1.0; with adhesive 1.5 1600 < D ≤ 1800 ; without adhesive 1.5; with adhesive 2.0 |
| 3 | Static Balance Accuracy | G40 |
PROCESS FLOW OF PULLEY
Our company is equipped with necessary equipment for processing pulleys, such as large oil pressure machines, rolling machines, specialized pulley automatic explosive welding operators, large diameter lathes, boring machines, ultrasonic flaw detectors, static balancing devices, pressure casting machines, etc. Due to the special correction process adopted by the company, the pulley pipe skin is rounded before processing, and the pulley pipe wall is uniform after processing, thereby ensuring that the pulley has high static balance performance and high mechanical performance.
PRODUCT FEATURES
For pulleys with complex forces, large loads and used in heavy working conditions, they all adopt a cast welded structure and expansion sleeve connection. Compared with traditional drums in China, this type of drum mainly has the following characteristics :
(1) The structural parameters of the pulley are advanced and reasonable, and there is a dedicated computer calculation program to determine the shaft diameter, cylinder skin thickness, wheel amplitude plate shape and spacing, as well as the position of the circumferential weld seam set at the position where the stress is minimum and the number of cycles is minimum.
(2) The key technology of using single sided welding and double sided forming ensures the quality of the weld seam.
(3) The expansion sleeve connection is used between the drum hub and shaft, which not only solves the problem of key connection stress concentration that has been existing for many years and the technical difficulties of manufacturing and installing axial double keyways, but also achieves overall quenching and eliminates welding internal stress.
(4) The circumferential and longitudinal welds of the pulley have undergone non-destructive testing, and the casting quality of the wheel hub has undergone magnetic particle or ultrasonic testing.
(5) The total radial runout of the outer circle after roller casting is less than 1mm.
(6) All drums undergo static balance tests before leaving the factory to achieve G40 accuracy.
(7) All driving pulley and directional pulley with high stress have undergone finite element analysis to ensure that the stress and strain of the rollers meet the requirements.
Due to a series of measures taken, the pulley group produced by SK has a reasonable structure, large bearing capacity, and reliable performance. And it overcomes the problem of fatigue fracture at the welding seam of the existing pulley plate in China. The pullley (including the welding part) is guaranteed to have a rotational fatigue strength of over 108°.
WORKSHOP OF FINISHED PULLEIES
PACKAGE AND DELIVEYR
APPLICATION INDUSTRIES
CONVEYORS EPC/BOT CONTRACTING CAPABILITY
VARIOUS CONVEYOR SPARE PARTS SUPPLY
AERIAL VIEW OF OUR FACTORY
INTELLIGENT PRODUCTION & TESTING
CERTIFICATES & HORNORS
BRANCHES & OFFICES
TEAM BUILDING
LONG-TERM STRATEGIC COOPEATORS
MAIN CUSTOMERS
CUSTOMERS VISITS
DOMESTIC & OVERSEAS EXHIBITIONS
SINGING CEREMONY
GLOBAL BUSINESS NETWORK
B /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | CE, ISO |
|---|---|
| Pulley Sizes: | Kk |
| Manufacturing Process: | Forging, Casting |
| Material: | Carbon Steel |
| Surface Treatment: | Smooth, Rubber or Ceramics |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant, Port, Dock, Energy, Cement, Metallurgy, Steel |
| Samples: |
US$ 7/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What safety considerations should be kept in mind when working with V pulleys?
Working with V pulleys involves certain safety considerations to ensure the well-being of individuals and the proper functioning of the equipment. Here are some important safety considerations to keep in mind:
1. Proper Guarding:
Ensure that V pulleys are adequately guarded to prevent accidental contact with moving parts. Guards should be in place to cover the pulleys and belts, minimizing the risk of entanglement, pinch points, or injuries caused by rotating components. Follow industry standards and regulations for guarding requirements and regularly inspect and maintain the guards to ensure their effectiveness.
2. Lockout/Tagout Procedures:
Before performing any maintenance or inspection tasks on equipment with V pulleys, implement proper lockout/tagout procedures. Lockout/tagout involves isolating the power source, de-energizing the equipment, and securing it with locks or tags to prevent accidental startup. This procedure ensures that the equipment remains in a safe and inoperable state during maintenance activities.
3. Personal Protective Equipment (PPE):
Wear appropriate personal protective equipment when working with V pulleys. This may include safety goggles or glasses to protect the eyes from flying debris, gloves to prevent hand injuries, and appropriate clothing to minimize the risk of entanglement. The specific PPE requirements may vary depending on the nature of the task, the environment, and local safety regulations.
4. Training and Education:
Ensure that personnel working with V pulleys receive appropriate training and education on safe operating procedures, maintenance practices, and emergency response protocols. Training should cover topics such as hazard awareness, proper use of equipment, lockout/tagout procedures, and the importance of following safety guidelines. Regular refresher training sessions can help reinforce safe practices and address any new safety concerns.
5. Inspection and Maintenance:
Regularly inspect V pulleys for signs of wear, damage, or misalignment. Pay attention to the condition of the belts, pulley grooves, and tensioning mechanisms. Maintain proper belt tension as per manufacturer recommendations to prevent slippage and ensure efficient power transmission. Promptly address any issues identified during inspections and conduct routine maintenance tasks to keep the pulleys in good working condition.
6. Load and Speed Limits:
Adhere to the load and speed limits specified by the manufacturer for the V pulleys and associated components. Exceeding these limits can lead to belt slippage, decreased efficiency, and potential equipment failure. Ensure that the V pulleys are selected and installed correctly based on the specific application requirements to avoid overloading or operating at excessive speeds.
7. Risk Assessment:
Conduct a comprehensive risk assessment of the work area and equipment to identify potential hazards related to V pulleys. Assess risks associated with installation, operation, maintenance, and emergency situations. Implement appropriate control measures to mitigate the identified risks and regularly review and update the risk assessment as needed.
It is essential to prioritize safety when working with V pulleys. By following these safety considerations and any additional guidelines provided by the equipment manufacturer, the risks associated with V pulley operations can be minimized, ensuring a safe working environment for all personnel involved.
Can V pulleys be part of fitness equipment like treadmills and stationary bikes?
Yes, V pulleys can be part of fitness equipment like treadmills and stationary bikes, playing a crucial role in their operation. Here’s a detailed explanation:
1. Belt Driven Systems:
Treadmills and stationary bikes often use belt-driven systems to transfer power from the motor or user’s pedaling motion to the moving components of the equipment. V pulleys are an integral part of these systems as they provide the necessary power transmission and control.
2. Motor Drive:
In motorized treadmills and stationary bikes, the V pulley is connected to the motor shaft, which drives the belt. The motor provides the rotational power needed to move the belt, allowing the user to walk, jog, or run on the treadmill or pedal the stationary bike. The size and design of the V pulley influence the speed and torque delivered to the belt and, consequently, the user’s movement.
3. Tension and Belt Alignment:
Proper tensioning and alignment of the belt are crucial for smooth and efficient power transfer in fitness equipment. V pulleys are often accompanied by tensioners and idler pulleys that help maintain the correct tension in the belt and ensure proper belt alignment. This ensures optimal performance and prevents belt slippage or premature wear.
4. Speed Control:
V pulleys allow for speed control in treadmills and stationary bikes. By using pulleys of different sizes, the speed ratio between the motor or user’s pedaling motion and the belt can be adjusted. This enables users to select their desired workout intensity by adjusting the speed at which the belt moves or the resistance level on stationary bikes.
5. Quiet Operation:
The design of V pulleys, combined with the flexibility and smooth engagement of V-belts, contributes to the quiet operation of fitness equipment. The pulley and belt system minimizes noise generation, providing a more enjoyable and peaceful workout experience for users.
6. Durability and Maintenance:
V pulleys used in fitness equipment are designed to withstand the demanding conditions of regular use. They are often made of durable materials such as steel or aluminum to ensure longevity. Regular maintenance, including periodic inspection, lubrication, and occasional belt replacement, is necessary to maintain the efficiency and reliability of the V pulley system in fitness equipment.
Overall, V pulleys are an essential component of fitness equipment like treadmills and stationary bikes, facilitating efficient power transmission, speed control, and user movement. Their design features, combined with properly tensioned belts, contribute to the overall performance, durability, and quiet operation of fitness equipment, supporting users in achieving their fitness goals.
In which industries are V pulleys commonly used?
V pulleys, also known as V-belt pulleys or sheaves, are commonly used in various industries due to their versatility and effectiveness in power transmission. Here’s an explanation of the industries where V pulleys are commonly employed:
1. Manufacturing and Industrial Sector:
The manufacturing and industrial sector extensively utilizes V pulleys in a wide range of applications. They are employed in machinery and equipment used in manufacturing processes, such as conveyor systems, pumps, compressors, machine tools, and packaging machines. V pulleys ensure efficient power transmission, enabling smooth operation and productivity in manufacturing facilities.
2. Automotive Industry:
V pulleys play a vital role in the automotive industry. They are used in various automotive systems, including engines, air conditioning systems, power steering systems, water pumps, and alternators. V pulleys in automotive applications ensure the proper functioning of essential components, contributing to the performance and reliability of vehicles.
3. HVAC and Refrigeration:
The HVAC (Heating, Ventilation, and Air Conditioning) and refrigeration industry heavily relies on V pulleys. They are employed in fans, blowers, and pumps used in HVAC systems, as well as in compressors and condenser units in refrigeration equipment. V pulleys facilitate efficient power transmission, enabling effective heating, cooling, and ventilation in residential, commercial, and industrial buildings.
4. Agriculture and Farming:
V pulleys are commonly used in the agriculture and farming industry. They are employed in agricultural machinery and equipment, such as tractors, combines, harvesters, and irrigation systems. V pulleys transfer power to various components, including pumps, augers, conveyors, and cutting mechanisms, ensuring efficient and reliable operation in farming operations.
5. Mining and Construction:
In the mining and construction industries, V pulleys find extensive use in heavy machinery and equipment. They are employed in excavators, bulldozers, cranes, loaders, and other mining and construction equipment. V pulleys facilitate power transmission to components such as hydraulic pumps, winches, and conveyor systems, ensuring reliable operation in demanding environments.
6. Power Generation:
V pulleys are utilized in power generation systems, including generators, turbines, and engines. They transfer power from the prime movers to the generators or other driven components. V pulleys in power generation applications contribute to the efficient conversion of energy and reliable electricity production.
7. Material Handling and Warehousing:
V pulleys are commonly employed in material handling and warehousing applications. They are used in conveyor systems, lifting equipment, and automated storage and retrieval systems. V pulleys enable the movement of materials and products, ensuring smooth and efficient logistics operations.
These are just a few examples of the industries where V pulleys are commonly used. Due to their versatility, reliability, and wide range of applications, V pulleys are employed in numerous industries and sectors that rely on efficient power transmission in their machinery and equipment.
editor by CX
2024-04-23